UL
LISummary:ulLIUsed to insert simultaneously insulation wedges into as many as four shapes of stator slots for motors of washing machines, refrigerators and air conditioners and micro power motorsLIIt is of high precision and high efficiency, easy for mold changing and maintenanceLIIt employs mec...
UL
LIAvailable wire diameter: 0.1 to 1.2mmLICoil diameter: maximum 240mmLIR.P.M: maximum 2,400rpmLIProgram memory: maximum 9setsLISpecifications:ulLIOperation: AC motorLIMotor: 3phase 0.4 or 0.75kWLIDimensions (L x W x H): 1,300 x 1,050 x 1,200mmLIWeight: 250kg/ulLIFeatures:ulLITh...
UL
LIApplications:ulLIStator I.D.: 120 to 160mm LIStack height: maximum 10 to 25mm LINumber of slots: 8 to 18 polesLIWinding speed: maximum 3,600rpm/ul LISpecifications:ulLIOperation: pneumatic and AC motor LIMotor: 3 phase 0.75kW LIDimensions (L x W x H): 800 x 1,050 x 1,500mm LIWe...
UL
LISummary:ulLIThis vertical double-head lacing machine combines electricity with pneumatics so as to automatically lace the stator?? two-end coilsLIThe mechanical drive actions are carried out by cam process while the auxiliary actions are carried out by pneumaticsLIProgrammable controller is us...
UL
LIMaterials: 55% cellulose, 45% polyester, polyester/rayon, and composite nonwoven fabricsLINon-textile flock or dustLISoft nature of the material, no scratch on the cleaning targetLIStrong liquid absorption abilityLIWithout any chemical adhesiveLIWith the latest nonwoven technology fr...
UL
LISummary:ulLIModel KX5-1015 machine is configured with pneumatic system, mechanical transmission and electrical system. With a technique so-called pull-in method, it is provided with functions of automatically determining the length of a slot wedge, feeding, cutting, crushing and forming and automa...
UL
LIAutomatic forming machine with hydraulic and integrative electrical control systemsLIEquipped with an inside expansion and outside compacting device for one-time pre-forming of inside, outside and top of coils inserted LIHas inserted cuff supports to protect the stator top insulation while forming...
UL
LISpecifications:ulLIStator I.D: 30 to 100mmLIStator O.D: maximum 160mmLIStack height: maximum 120mmLINumber of slots: 8 to 36 slotsLIOperation: pneumatic and AC motorLIMotor: 3 phase 0.4WLIDimensions (L x W x H): 1,100 x 750 x 1,100mmLIWeight: 550kg/ulLIFeatures:ulLIWide rang...
UL
LIEnd final-forming machine LIThe machine takes hydraulic transmission and electrical control. Stator overhang coil is formed finally after laced by expanding the ID and compacting the OD. It is simple in structure and friendly for operationLIStack height: 20 to 120mmLIStator ID: Φ45 to 80mm...
UL
LIApplications:ulLIStator I.D: 30 to 120mmLIStator O.D: maximum 120, 160 and 190mmLIStack height: maximum 40, 80 and 120mmLINumber of slots: 8 to 36slots/ulLISpecifications:ulLIOperation: AC motorLIMotor: 3phase 0.4 or 0.75kWLIDimensions (L x W x H): 900 x 900 x 1,000mmLIWeight: ...
UL
LIMeasurements: 1,300 x 1,480 x 1,450mmLIWeight: 500kgLIPower supply: 220V ACLICompressed air: 0.5mpa (5kgf/cm)LIPress capacity: 19,600N (2.0 ton) x 2 sets low noise typeLIWire gauge: 0.08 to 2.0mmsup2/sup (UL1007AWG # 28 to 14) within OD 3.4mmLICapacity: 0.8 seconds per piece (in case o...
UL
LISpecifications:ulLIStator I.D: 30 to 100mmLIStator O.D: maximum 160mmLIStack height: maximum 120mmLINumber of slots: 8 to 36 slotsLIOperation: pneumatic and AC motorLIMotor: 3 phase 0.4WLIDimensions (L x W x H): 1,100 x 750 x 1,100mmLIWeight: 550kg/ulLIFeatures:ulLIWide range...
UL
LIEnd final shaping machine LIThe machine takes hydraulic transmission and electrical control. Stator overhang coil is formed finally after laced by expanding the ID and compacting the OD. It is equipped with a moving table for stator in and out, which is friendly and safe for operation. It is simple ...
UL
LIMaximum speed: 3,000rpmLIStop angle: ±0.1°LIAvailable wire diameter: 0.02 to 0.10mmLICoil diameter: 10mmLIPrecision of two wires: 0.0001mmLICutting length control (automotive): ±1mmLITemperature control (automotive): ±2°LIPower: 220V ACLIPneumatic pressure: 3...
UL
LIInner packing: confirmed size, plastic spools, attached LIlabel containing detailed LIAvailable in various specificationsLIOuter packing: in cartons or according to customers' requirementsLIDiamater: 0.12, 0.15, 0.18, 0.20 and 0.25LIProduction capacity: 1.2 billion metersLIGuangming brand ...
UL
LIAuto-inserting machine LIWith a closed hydro-mechanical transmission and integrative PLC system, which is based on a technique pull-in method LIProvided with functions such as automatically determining the length of a slot wedge, feeding, cutting, pushing, forming as well as intermittently feeding...
UL
LIMeasurements: 1,300 x 1,480 x 1,450LIWeight: 500kgLIPower supply: 220V ACLICompressed air: 0.5mpa (5kgf/cm)LIPress capacity: 19,600N (2.0 ton) x 2 sets low noise typeLIWire gauge: 0.08 to 2.0mmsup2/sup (UL1007AWG # 28 to 14) within OD 3.4mmLICapacity: 0.8 seconds per piece (in case of ...
